Username: Password:

Author Topic: Juggernauts wiring question  (Read 4707 times)

Ivanickson

  • Junior Flyweight
  • *
  • Posts: 11
  • BKPs:
Juggernauts wiring question
« on: September 21, 2023, 11:55:48 PM »
Hello! What do you think guys, is this the right wiring? I'm not sure if something is wrong, but I set my RME Babyface Gain at 8.0 to get about -1 dB on meter and I have soft sound with a lot of low frequencies and it is still difficult to exceed 0 dB with a hard palm mute hit. For example for Unity and C-Bomb I need to set Gain at 2.5 and for Silo I need to set Gain at 5.0.

timmy_b

  • BKP
  • Flyweight
  • *
  • Posts: 90
  • The OTHER Tim and tech at Bare Knuckle Pickups
Re: Juggernauts wiring question
« Reply #1 on: October 03, 2023, 08:08:05 AM »
Hi, I can't see anything obviously amiss that's going to cause a problem like that. Is it sounding dull on both pickups?

It might be better, if you need further help, to email us at sales@bareknucklepickups.co.uk, as I'll see messages much faster than I will on here.
Hi all, yes, it's another Tim! I'll be here to answer any questions you want to throw at me, here or via sales@bareknucklepickups.co.uk