Username: Password:

Author Topic: Push pull wiring fail  (Read 7580 times)

Pickles

  • Strawweight
  • *
  • Posts: 8
  • BKPs:
Push pull wiring fail
« on: March 27, 2021, 01:25:47 PM »
So short version, trying to install my pickups with a push pull on the tone pot and I’ve made an absolute meal of it. When I plug in I just get loud hum, so I’m guessing maybe it’s a ground problem? All I’m trying to do is hook up to humbuckers to a vol and tone pot with the tone being a push pull to split the pickups when pulled. Taken a couple of pics hoping someone might see something obvious that I can fix. The yellow wire from the first lug on the tone knob is going to the side of the volume pot. Not sure if that was necessary?

https://imgur.com/gallery/nF4CT2r

Dave Sloven

  • Welterweight
  • ****
  • Posts: 4312
    • Get our album here (alnico Black Hawks)
Re: Push pull wiring fail
« Reply #1 on: March 28, 2021, 12:55:06 PM »
Bare Knuckle made a video on how to do this

https://www.youtube.com/watch?v=UNh8soN10VQ
BLACK HAWKS
IMPULSES
COBRA-T
WAR PIGS
STOCKHOLM
COLD SWEATS
MIRACLE MAN
TRUE GRIT

https://slovendoom.bandcamp.com/releases