Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Pickles on March 27, 2021, 01:25:47 PM

Title: Push pull wiring fail
Post by: Pickles on March 27, 2021, 01:25:47 PM
So short version, trying to install my pickups with a push pull on the tone pot and Iíve made an absolute meal of it. When I plug in I just get loud hum, so Iím guessing maybe itís a ground problem? All Iím trying to do is hook up to humbuckers to a vol and tone pot with the tone being a push pull to split the pickups when pulled. Taken a couple of pics hoping someone might see something obvious that I can fix. The yellow wire from the first lug on the tone knob is going to the side of the volume pot. Not sure if that was necessary?

https://imgur.com/gallery/nF4CT2r
Title: Re: Push pull wiring fail
Post by: Dave Sloven on March 28, 2021, 12:55:06 PM
Bare Knuckle made a video on how to do this

https://www.youtube.com/watch?v=UNh8soN10VQ