Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: sgmypod on December 17, 2007, 03:08:19 PM

Title: Pedal mod
Post by: sgmypod on December 17, 2007, 03:08:19 PM

Have a cooltronic bulldog...read somewhere a midrange mod put a 0.01uf cap on pins 1 and 4....anyone heard of this

Title: Pedal mod
Post by: HTH AMPS on December 17, 2007, 07:37:39 PM

got a schematic? - not familiar with that pedal.  is it a tube screamer clone?

 :twisted:

Title: Pedal mod
Post by: sgmypod on December 18, 2007, 09:15:39 AM

no thats the prob can't find anything on the wiring side

Title: Pedal mod
Post by: MrBump on December 21, 2007, 09:15:27 AM

If you know what the pedla is modelled on, you might want to have a look here:

http://www.buildyourownclone.com/

They supply clone kits, and there are free schematics and diagrams online.

Mark.

Title: Pedal mod
Post by: indysmith on December 21, 2007, 10:21:42 AM

do yu mean the vox 'valve powered' cooltron bulldog? It's gonna be tough to find a schematic for that i bet

Title: Pedal mod
Post by: sgmypod on December 21, 2007, 10:26:25 AM

yup the same was reading a post in harmony about a mod...worst is love the pedal...but love to try modding