Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Dazza1004 on March 05, 2008, 02:42:43 PM

Title: Yet more speaker / ohm questions
Post by: Dazza1004 on March 05, 2008, 02:42:43 PM

Tut-tut but I fear I have committed the cardinal sin of not doing my homework properly (and being a bit of a dumb ass to boot)

I have just ordered an Orange 2x12 to run with my Mesa 1x12 combo. The Mesa has an 8ohm Vintage 30 but I have noticed the Orange cab, which has 2 Vintage 30’s, is 16ohm. Does this mean the V30’s in the Orange are the 16ohm version ?

The Mesa has 2 x 8ohm and 2 x 4ohm outputs on the back.  

I know nothing about ohm’s and impedance, have I dropped a huge tezzer or can I get everything working together ?

Cheers

Title: Yet more speaker / ohm questions
Post by: Ratrod on March 05, 2008, 02:56:25 PM

2 X 8 ohms in serial = 16 ohms.

2 X 8 ohms in paralel = 4 ohms.

If you wire the 2X10 in paralel, you can hook that up to the 4 ohm output of the amp and the 1X12 in the 8 ohm output.

Hope this helps.

Title: Yet more speaker / ohm questions
Post by: Dazza1004 on March 05, 2008, 03:01:04 PM

so this does mean I need to re-wire the orange cab when I get it ?

sorry if I am being a bit thick

Title: Yet more speaker / ohm questions
Post by: Elliot on March 05, 2008, 08:50:38 PM

Yeah - if they are two 8ohm V30s in series making 16ohm rewire them so they are in parallel so they are 4 ohm and use 1 of the 4 ohm outputs on the mesa.  Here is a wiring diagram:

http://professional.celestion.com/guitar/features/loadingyourspeakers/index.asp#