Bare Knuckle Pickups Forum

At The Back => Time Out => Topic started by: sgmypod on November 28, 2008, 02:57:58 PM

Title: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: sgmypod on November 28, 2008, 02:57:58 PM

Hull is officially cr@p can't find these anywhere in hull

Update....Guy I bought amp from is sending me..free NOS Plessy ones

Title: Re: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: hamfist on November 29, 2008, 07:45:33 AM

Result !!!

Title: Re: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: sgmypod on November 29, 2008, 10:19:15 AM

yeah so maybe get amp to stop farting..and check what work and what doesn't

Title: Re: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: HTH AMPS on November 30, 2008, 08:42:01 PM

Quote from: sgmypod on November 29, 2008, 10:19:15 AM

yeah so maybe get amp to stop farting..and check what work and what doesn't

the farty tone is most likely to be the actual circuit design and the fact that it's not voiced for guitar.

the EF86s used in that amp are quite high gain so you're likely overdriving (blocking distortion) each stage putting a guitar through it.

wire up the preamp like an AC30/4 with the single EF86 front end straight into the ECC83 phase inverter - it'll sound killer, trust me.

Title: Re: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: sgmypod on November 30, 2008, 09:33:14 PM

at mo just trying to check what works and what doesn't the 0.1's are def dead

Title: Re: I'd kill for 7 0.1uf 500v caps..(now I don't need too)
Post by: sgmypod on November 30, 2008, 09:34:17 PM

like the idea of the ac30/4..won't it be 50/4 *L*..can't find a schematic for the ac30/4 with el34's (these were made)