Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: sgmypod on March 23, 2009, 03:25:51 PM

Title: Sg truss rod tool
Post by: sgmypod on March 23, 2009, 03:25:51 PM
Damn sg has a nut for the truss rod..where do you buy a tool from for these
Title: Re: Sg truss rod tool
Post by: Twinfan on March 23, 2009, 03:27:34 PM
Simple socket set should do it?

Or try WD Music....
Title: Re: Sg truss rod tool
Post by: Fikealox on March 23, 2009, 11:00:04 PM
Coincidentally, I was just adjusting my SG's truss rod. An 8mm socket on an extension bar should do the trick, dude.
Title: Re: Sg truss rod tool
Post by: Fourth Feline on March 25, 2009, 11:29:57 AM
Quote from: Fikealox on March 23, 2009, 11:00:04 PM
Coincidentally, I was just adjusting my SG's truss rod. An 8mm socket on an extension bar should do the trick, dude.

As Twinfan and Fikealox said, I just use an 8mm box key / socket .  :)
Title: Re: Sg truss rod tool
Post by: FELINEGUITARS on March 29, 2009, 03:55:00 PM
5/16" would be better/ideal
Title: Re: Sg truss rod tool
Post by: Fourth Feline on March 31, 2009, 11:48:40 AM
Quote from: FELINEGUITARS on March 29, 2009, 03:55:00 PM
5/16" would be better/ideal

Thanks for the clarification Jonathan ;  I will look out for a 5/16" head for my 'snap on' driver now .  :)
Title: Re: Sg truss rod tool
Post by: sgmypod on March 31, 2009, 03:09:18 PM
yes thanks for that will go buy one for 'old un'