Bare Knuckle Pickups Forum
Forum Ringside => Guitars, Amps and Effects => Topic started by: tomjackson on June 24, 2009, 07:48:32 AM
-
Okay, you can take a small pedalboard and 4 compact effects, what would be your effects?
Mine would be:-
Korg pitchblack
Xotic BB Preamp
Fulltone Deja 2
MXR Carbon Copy Delay
Remember I said compact so either something standard boss sized or if it rocks then a vox wah size.
Oh yeah, there's power, amps and guitars, tequilla and loads of fit birds on the island too :wink:
-
Eh?
I want to make a pedal board for my setup which is:
Diezel Columbus Midi Board
RMC3 Wah
Digitech Whammy
and I want to buy a Lehle looper.
-
hmm tough one this, but....:
Korg pitchblack tuner
HTH SD-1
Lovepedal pickle vibe
BYOC Triboost
simple but effective
-
Alchemist Amp Footswitch
MXR GT OD
Boss TU-2
Crybaby Classic
But that actually is the extent of my pedalboard at the moment (plus volume pedal)
-
Korg DT-10 tuner
Xotic BB Preamp
MXR Stereo Chorus
Rothwell F1 Booster
I'm hoping there's drummers singers and bass players too? ;)
-
Fulltone Deja 2
Been eyeing the Deja up for a while. What's it like Tom - have you got any clips?
-
Keeley TS808, Keeley BD2, Keeley Katana, Keeley Mellow way.
-
Korg Pitchblack
JAM Waterfall
Modded RAT
Tremolo of some description
-
What I already have:
Lehle 3@1
MXR M134 Chorus (OK, it's slightly wider than a boss unit, but it's still only one effect in a single pedal, so I'm counting it!)
MXR M117R Flanger (ditto)
Morley Bad Horsie (I guess that's bigger than a Vox too, but I don't think MOrley should be penalised for other people's cr@ppy designs ;))
(OK, my pedalboard also has a Lehle Looper & MXR Phase 90, but I hardly ever use those & could easily manage without them...)
-
MXR EQ
Boss NS-2
Boss DD-3
Korg Pitch Black tuner
-
Fulltone Deja 2
Been eyeing the Deja up for a while. What's it like Tom - have you got any clips?
Never said I owned it Ian, it is a fantasy island afetr all! Tried one though, was very nice :D
-
I think my dream four pedal board would be the one I have:
Fulltone DejaVibe
Crybaby wah
TS-808 Tubescreamer
MXR Carbon Copy Delay
I'd miss a Phase 90 but I'd survive. :)
For those wanting to know about the Dejavibe, it's a really lovely pedal, perfect for all your Hendrix/Trower requirements. I also use mine on the vibrato setting for a fakey Leslie type effect. For sounds listen to anything Robin Trower has recorded in the last few years as he uses one a lot.
-
Pitchblack
Xotic RC
MXR GT OD
MXR Carbon copy
Which is my pedalboard minus the rotovibe which rarely gets used
-
What's with all the pitch blacks lol?
TurboTuner ST-200
Ethos overdrive
Roland Space Echo
Tycobrahe Octavia
-
Teese Picture Wah
Mini Deja Vibe
D*A*M Drag'n'fly
Carbon Copy
-
Fulltone Deja 2
Been eyeing the Deja up for a while. What's it like Tom - have you got any clips?
Never said I owned it Ian, it is a fantasy island afetr all! Tried one though, was very nice :D
Haha - forgot that it was fantasy. I'm gonna have to think long and hard about this!
-
First I'd put an N-tune in my guitar and leave the Pitchblack at home. :)
then I'd take this:
Dunlop Crybaby From Hell
Boss SD-1 heavily modded
Boss GE-7
Boss DD-20 (I'd make it fit.. can't live without my DD-20)
There's a shiteeload of Pitchblacks here 8) because it rocks presumably! :D
-
I've too many pedals to chose from, I can't leave them behind. I'd have to swim home!
-
On second thought, I'd take:
- Soldering iron
- Solder (duh)
- a shoebox full of resistors, capacitors, opamps, transistors etc. and jacks
- a knife for carving out wooden hammond boxes
- 20 or so TB footswitches
- 20' of cable and 40 plugs.
That's fit in the same room! And I'll have something to do :lol:
-
Boss TU-2
Cry Baby Wah
T-Rex Replica
Some kind of looper
I surely would miss my Emma Reezafratzitz, but taking that there's a shiteload of amps on this Island I'll have to leave it behind :(
-
On second thought, I'd take:
- Soldering iron
- Solder (duh)
- a shoebox full of resistors, capacitors, opamps, transistors etc. and jacks
- a knife for carving out wooden hammond boxes
- 20 or so TB footswitches
- 20' of cable and 40 plugs.
That's fit in the same room! And I'll have something to do :lol:
like it..would want some schematics..breadboard etc as well
-
On second thought, I'd take:
- Soldering iron
- Solder (duh)
- a shoebox full of resistors, capacitors, opamps, transistors etc. and jacks
- a knife for carving out wooden hammond boxes
- 20 or so TB footswitches
- 20' of cable and 40 plugs.
That's fit in the same room! And I'll have something to do :lol:
like it..would want some schematics..breadboard etc as well
Nah just wing it! And make it point to point .. maybe make a wooden plate, stick the parts' legs through and solder on the other side.. that would work. :)
Something i did forget though: a biiiig roll of wire ;)
-
My old Jen Wah, Fulltone RTO, MXR Phase 90 and Danelectro Reel Echo. Being so old I don't need a tuner, if I could have a tuning fork it would be a plus, but I could get by without one!
-
Are there other guitarists on this desert island, who I can swap pedals with?
-
Are there other guitarists on this desert island, who I can swap pedals with?
Yes to everybody who has replied will be there, no need to take another pitchblack. Dont turn up with a Behringer bounty and expect to be swapping for Xotics and Fulltone though Tom :wink:
And I forgot to mention, Sounds Great may open a branch there also so take some cash :D
-
I'm good with just a tubescreamer thanks. :P
-
I'm good with just a tubescreamer thanks. :P
:o :| I'd .. feel all empty .. and lonely... and sad.
-
HBE Dos Mos
HBE Power Screamer
Telenordia Kompressor
Ibanez Weeping Demon or Crybaby Wah