Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Transcend on November 09, 2010, 05:46:33 PM

Title: how would i adjust this diagram for a coil split/tap
Post by: Transcend on November 09, 2010, 05:46:33 PM

Ive attached the wiring diagram for the standard ibanez wiring but i want position 4 to just be a coil split/tap (not sure of the correct term)

as i dont want to have to get my magnet reversed in my neck pickup as it is in the original ibanez neck pup.

thanks guys

Title: Re: how would i adjust this diagram for a coil split/tap
Post by: juansolo on November 10, 2010, 08:11:31 AM

If you're wanting to split the neck HB that's going to be awkward to do if you want to also keep the serial/parallel switching on it also. You'd probably only be able to do it with a fender super switch which will allow you to do pretty much any combination of wiring you can think of.

Title: Re: how would i adjust this diagram for a coil split/tap
Post by: Transcend on November 10, 2010, 03:51:16 PM

Its just the bridge humbucker that im wanting to be split alone i dont want it to also have the slug coil of the neck pickup on that switching option

Title: Re: how would i adjust this diagram for a coil split/tap
Post by: juansolo on November 10, 2010, 05:46:04 PM

Quote from: Toe-Knee on November 10, 2010, 03:51:16 PM

Its just the bridge humbucker that im wanting to be split alone i dont want it to also have the slug coil of the neck pickup on that switching option

Without getting my hands on it, I don't know what that switch is doing where. Sorry about that :( It does sound like it might be possible. I still stand by that if you can get a super switch in there, you can wire the 5 positions to do whatever you like. They're wonderful things.

Title: Re: how would i adjust this diagram for a coil split/tap
Post by: Transcend on November 10, 2010, 06:36:55 PM

Ill look up this superswitch thanks for your help.