Bare Knuckle Pickups Forum
Forum Ringside => Tech => Topic started by: Blackmoon181 on November 30, 2010, 04:39:17 PM
-
Hi Guys
After taking the plunge and finally buying the Miricle Man neck pickup for my Ibanez 370DXL, i thought than rather
paying a lot of money for installation i should learn and do it myself. After consulting the wiring diagram from the
ibanez website
http://www.ibanez.com/supportResources/wiring/2006/W03005CHSHO11L5_NDM2.gif
i attempted it and failed miserably. i was wondering if i could get someone to point out which wires go in what
positions as i can't convert the BKP guide into the Ibanez. I have a Nailbomb in the bridge and the middle pickup is a
stock ibanez.
Thanks for any help posted. you will make a guitar player very happy and have some more money for future GAS
purchases!
-
Assuming you have 4 conductor wire on BKPs
swap BKP Red for ibanez white
Join BKP green and white together and swap for Ibanez red
BKP black & braided wire goes to back of pot
If it sounds thin and nasty in positions 2 and 4 reverse the BKP red and BKP black
If still no luck ask again
-
Assuming you have 4 conductor wire on BKPs
swap BKP Red for ibanez white
Join BKP green and white together and swap for Ibanez red
BKP black & braided wire goes to back of pot
If it sounds thin and nasty in positions 2 and 4 reverse the BKP red and BKP black
If still no luck ask again
i reversed the BKP red and BKP black as the first option you suggested sounded thin and nasty, and it sounds great now.
thanks very much!
-
^ More cracking BKP Forum service!