Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: The Norwegian Guy on December 09, 2010, 06:40:22 PM

Title: Could somebody help me out with a HSS config with a split switch?
Post by: The Norwegian Guy on December 09, 2010, 06:40:22 PM

This is what I'm thinking.

MM
MM
Crawler

Master volume
Master tone
5-way switch (normal strat positions 1.neck - 2.neck&middle - 3.middle etc.)
on-on DPDT switch to split the crawler.

I have no idea of what caps to use, or how to wire this thing.

I would appreciate help!

AndreasM

Title: Re: Could somebody help me out with a HSS config with a split switch?
Post by: 1reeper on December 10, 2010, 04:32:57 PM

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=HSS_1v_1t_5w

Not sure how good you are with electronics, but this diagram will work for standard strat HSS, for the split, wire the two wires that are usually taped together (not sure of the colour, I only use two conductor) to the center lug, and wire a connection to ground to one side, that's it, you could use a spdt for this if you like.

|O|X|- to ground
|O|X|- two taped wires
|O|O|