Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: gaex86 on January 08, 2011, 08:04:34 PM

Title: Yardbird height?
Post by: gaex86 on January 08, 2011, 08:04:34 PM
Hi guys! I put a set of yardbird in my tele. Which height should I set the bridge and the neck?
Thanks in advance
Title: Re: Yardbird height?
Post by: Telerocker on January 08, 2011, 08:12:12 PM
Not too close, but experiment. I have my telepu's relatively low, cause they're balanced best that way, I think. Doesn't mean this have to be the best for your guitar. Just find the sweet spot going from high to low, everytime a tad. 
Title: Re: Yardbird height?
Post by: gaex86 on January 08, 2011, 08:22:36 PM
Thanks for the tip! The problem is that's my first time adjusting pickup height, and don't really know how to start.
I've always had a luthier setting my guitar so I'm "naive".

An hour ago I picked my tele and found out one of bridge pickup screw was almost falling and was totally unscrewed. The bridge pickup was way too low from how I remember it was yesterday!So I'm trying to adjust it!
Title: Re: Yardbird height?
Post by: gaex86 on January 11, 2011, 07:52:56 PM
anyone else?
Title: Re: Yardbird height?
Post by: Plexi Ken on January 11, 2011, 10:39:06 PM
Try 3/32 treble side and 1/8 bass on both pickups as a starting point.
Title: Re: Yardbird height?
Post by: gaex86 on January 15, 2011, 09:40:44 AM
Try 3/32 treble side and 1/8 bass on both pickups as a starting point.

Thanks I'm goig to try it!