Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Kiichi on April 18, 2011, 10:00:23 AM

Title: Quick wiring question
Post by: Kiichi on April 18, 2011, 10:00:23 AM
Hey,
just a very quick question: In a HSH autosplit wiring, which cables to I have to change to use the other coil of the humbucker?

I right now have the classic Middle + Inner Bridge Coil split, but I don´t like it too much, so I wanne try the outer coil and after that maybe leaving both on, should the split not work.

Thanks for the help guys!
Title: Re: Quick wiring question
Post by: Twinfan on April 18, 2011, 12:17:40 PM
I think you swap red and black  :)
Title: Re: Quick wiring question
Post by: Kiichi on April 18, 2011, 01:55:22 PM
Thanks man, just tried it and it seems to have worked. No I got a brutally bright tone in that position. And when I say brutal bright I mean Irish Tour and Rebell Yell look dark and muddy in comparison.
Will have to try if this ain´t way too much, but first impression kinda says it´s kinda cool in a way. Very agressive and articulate. Sounds extremly lively and organic. Great new flavour and something different for sure.
It might be a problem though that when I switch to any of the other 4 positions is sound, as said, kinda dark and muddy in comparison.
Title: Re: Quick wiring question
Post by: Twinfan on April 18, 2011, 02:02:29 PM
Well you're using the screw coils, so the bridge will be CRAZY bright!  :lol:
Title: Re: Quick wiring question
Post by: Kiichi on April 18, 2011, 02:24:32 PM
That sure as hell is what I did xD Screw coil bridge + single coil middle^^

If I wanted to leave the bridge fully on and just add the middle, what would I have to do from here?
Title: Re: Quick wiring question
Post by: Twinfan on April 18, 2011, 03:41:36 PM
You'll need to remove the green/white from the 5-way and leave them joined (but sealed under tape).  That should give the you three coils I think?
Title: Re: Quick wiring question
Post by: Kiichi on April 18, 2011, 05:33:55 PM
Leaving the red and black the way they are now, with the outer coil tap?
Can anyone second that?
Title: Re: Quick wiring question
Post by: Twinfan on April 18, 2011, 06:12:43 PM
Try them as they are, but you may find the bucker out of phase with the middle single.  If that's the case, swap black and red  :)
Title: Re: Quick wiring question
Post by: Kiichi on April 18, 2011, 07:00:07 PM
Ok boss, will do a.s.a.p.
Title: Re: Quick wiring question
Post by: Kiichi on April 18, 2011, 08:18:32 PM
Yeah, had to switch red and black around again, but now it works nicely. I think I´m gonna stick with this configuration, although it´s not what I expected.
Now in that position I have like a RY with more bass and all in all fuller and a bit smoother + some of that single coil pick sound. Quite cool.

Thanks for the quick help mate!
Title: Re: Quick wiring question
Post by: Twinfan on April 18, 2011, 08:52:32 PM
Not a problem fella  :D