Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Jofipe on June 20, 2011, 06:50:15 PM

Title: How do I install this one?
Post by: Jofipe on June 20, 2011, 06:50:15 PM

Argh :)
Where do the wires go here?
(http://i220.photobucket.com/albums/dd143/jonasfp/foto.jpg)

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 07:19:30 PM

Would anyone have a picture of their installation? :)

Title: Re: How do I install this one?
Post by: Transcend on June 20, 2011, 08:03:08 PM

The red goes to the first tag of the volume pot for that pickup position

the green and white stayed taped off together (unless you want splits/taps/parrallel wiring)

the black and bare go to the back of a pot

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 08:23:30 PM

Thats it? just those three wirings?  cool.

Title: Re: How do I install this one?
Post by: Transcend on June 20, 2011, 08:25:09 PM

yeah thats all for standard humbucker wiring.

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 08:25:55 PM

Thank you :))

Title: Re: How do I install this one?
Post by: Transcend on June 20, 2011, 08:26:31 PM

No problem.

Enjoy the pickup!

Which is it by they way?

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 08:33:03 PM

Emerald bridge.. and iv got a Mule bridge.  should be interesting.  its a LP as you can maybe see.

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 08:49:56 PM

I meant Mule neck.

Title: Re: How do I install this one?
Post by: Transcend on June 20, 2011, 08:58:55 PM

Ah awesome if possible record some clips i am quite interested in the emerald

Title: Re: How do I install this one?
Post by: Jofipe on June 20, 2011, 09:02:48 PM

I will :)
BTW, what goes to the one with the bumblebee?   Is it the same for the neck PU?

Title: Re: How do I install this one?
Post by: Transcend on June 20, 2011, 09:12:51 PM

Nothing goes to those other than whats already there.

The pickups are same bridge and neck just connected to the respective volume pot

here i found the LP wiring diagram on the main site for you

http://www.bareknucklepickups.co.uk/main/downloads/schematics/general/humbuckers/2_hum__2_vol__2_tone__4_con__3_way_toggle.pdf