Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: nipper on June 20, 2011, 09:23:01 PM

Title: ...someone can explain this?
Post by: nipper on June 20, 2011, 09:23:01 PM

I have a bass pickup with 4 conductors and would realize a complete tap1/tap2/series/parallel combination with only 2 on/on mini toggle switches and found this (see 1H60):
http://www.geocities.jp/dgb_studio/1hvari_e.htm#60 (http://www.geocities.jp/dgb_studio/1hvari_e.htm#60)
my wire combinations and colors are:
series:
green=hot
brown=ground
white and yellow=connect
parallel:
green and white=hot
brown and yellow=ground
single coil 1:
white=hot out
brown, yellow, green=ground
single coil 2:
green= hot
white, brown, white=ground
I don't understand how to correctly connect  the wires to switches watchin the wiring diagram in the link: someone can explain it?
Thank you very much
J

Title: Re: ...someone can explain this?
Post by: Jazz Rock on June 20, 2011, 11:37:28 PM

I can't help you understand the diagram in the link, because I hardly comprehend it myself, but you should take a look at th eSeymour Duncan website, they have loads of useful wiring diagrams. As you know what each of your wires are, it shouldn't be too difficult to corrolate what you have with the Seymour Duncan colour coding.

Follow this link and take your pick: http://www.seymourduncan.com/support/wiring-diagrams/

Title: Re: ...someone can explain this?
Post by: Jazz Rock on June 20, 2011, 11:51:00 PM

I didn't realise, you have some very good one on this website as well: http://www.bareknucklepickups.co.uk/main/schematics.php

Title: Re: ...someone can explain this?
Post by: ToneMonkey on June 21, 2011, 12:46:03 PM

www.guitarelectronics.com is also a good place to start.