Bare Knuckle Pickups Forum
At The Back => Time Out => Topic started by: Dmoney on October 19, 2011, 04:00:59 PM
-
Starting to get stuff ready for a new amp project.
this was an AOR50...
the spoils of war are 4x 50uf+50uf 500v LCR can caps. might be ebay worthy?
also a whole AOR PCB and some pots.
Turns out the chassis is punched with a bunch of holes at the front. handy!
Most things riveted on though, so i guess the best way to deal with that is bust out the drill?
EDIT: soz for the massive photos.