Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: sambo on February 02, 2006, 05:55:54 PM

Title: fitting a tapped p-90 without fitting the tap?
Post by: sambo on February 02, 2006, 05:55:54 PM

is it ok to fit a tapped p-90 without actually wiring the tap so i can use it until i buy a push/pull pot..?

Title: fitting a tapped p-90 without fitting the tap?
Post by: PhilKing on February 02, 2006, 07:18:54 PM

Yes, just decide which sound you want (probably the full output), and insulate the tap wire.

Title: fitting a tapped p-90 without fitting the tap?
Post by: sambo on February 02, 2006, 10:03:35 PM

ok thanks phil. ive done that now but how exactly do you choose which sound you want then????

Title: fitting a tapped p-90 without fitting the tap?
Post by: PhilKing on February 03, 2006, 12:59:08 PM

You have to try both.  You can take the wire out through the jack socket before you solder it, and try wiring each.  See which works best for you.

Title: fitting a tapped p-90 without fitting the tap?
Post by: sambo on February 03, 2006, 09:12:02 PM

ok thanks mate.