Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Acatalepsy on July 07, 2012, 06:16:35 PM

Title: ESP eclipse II wiring
Post by: Acatalepsy on July 07, 2012, 06:16:35 PM

I can't find a diagram that covers the type of wiring in my guitar (this is the US version of the guitar, which has 2 Volume knobs and 1 master tone knob) My pickups have the braided 2 wiring scheme. Am I blind or is it just not there? There is one which is for the correct vol/tone knobs but it is 4 conductor only.

Title: Re: ESP eclipse II wiring
Post by: Mikegblues on July 07, 2012, 06:28:32 PM

Follow the diagram but ignore the green and white and substitute:

Black and bare for the braided shield (Soldered to back of pot)
red for the black inner wire going to the bottom lug (With lugs pointing to right).

Title: Re: ESP eclipse II wiring
Post by: Acatalepsy on July 08, 2012, 01:28:26 AM

Quote from: Mikegblues on July 07, 2012, 06:28:32 PM

Follow the diagram but ignore the green and white and substitute:

Black and bare for the braided shield (Soldered to back of pot)
red for the black inner wire going to the bottom lug (With lugs pointing to right).

Thanks, that worked a charm!