Bare Knuckle Pickups Forum
Forum Ringside => Pickups => Topic started by: rcsierra13 on August 14, 2012, 06:17:51 PM
-
So I got a Holy Diver secondhand and am wanting to put it in my RG7421. I don't have the wiring schematic but was hoping someone could help me out?
Its a 4 connector and looking at what is already in my RG7421 I see that I would be left with 2 wires coming out of the BKP spare. Anyone able to help me out?
This is how the RG7 is currently wired. The red arrow points to the grey wire which is the main wire out of the pickup. The 3 blue arrows point to red and white wires that go to the pickup selector and the ground that's soldered to the pot.
(http://i947.photobucket.com/albums/ad316/rcsierra13/a.jpg)
Sorry if I posted in the wrong section (I'm a noob)
-
Should be put in the Tech section but I doubt anyone here will complain. Maybe a moderator will move it. And I don't know the RG wiring system so I can't help you there sorry.
-
Theres an Ibanez wiring diagram on the main site.
https://bareknucklepickups.co.uk/main/downloads/schematics/general/humbuckers/2_hum__ibanez_style_5_way_switch__1vol_1tone_.pdf
-
Ahhh sorry about the post in the wrong place, hopefully someone can move that for me.
Thanks for the diagram, will def help out!
-
let us know what you think of this pickup in this guitar. i have the same guitar coming this week and am curious about your findings. im looking at either a ceramic warpig or the holy diver.