Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: Slink on September 10, 2013, 02:02:12 AM

Title: Pickup Ring Dimensions
Post by: Slink on September 10, 2013, 02:02:12 AM

Hello

Does any one have the dimensions for the pickups so i know what size pickup ring to buy?

Thanks

Title: Re: Pickup Ring Dimensions
Post by: littleredguitars2 on September 10, 2013, 02:19:27 AM

arent normal humbuckers all the same size and you just choose between flat or angled?

Title: Re: Pickup Ring Dimensions
Post by: Dave Sloven on September 10, 2013, 02:57:51 AM

You might need some special pickup ring if it is to compensate for an oversize EMG pickup rout, but in general I've not heard of this, I think normal pickup rings will cover that.

BKP humbuckers are a standard size and should fit normal pickup rings.  The only place where I've had issues is with the baseplates, which do not touch the pickup rings but can rub on the pickup cavity if the baseplates on your original pickups are smaller or not as 'square' as BKPs.  Your main concern would be flat or angled, straight or curved, same as with your standard pickups.

Title: Re: Pickup Ring Dimensions
Post by: Philly Q on September 10, 2013, 08:33:13 AM

All dimensions are here:

https://bareknucklepickups.co.uk/main/dimensions.php (https://bareknucklepickups.co.uk/main/dimensions.php)