Hello
I bought a nailbomb (bridge) 4 conductors alnico V and a MQ (P90 humbucker sized) neck for a guitar I'm building and I need help to wire everything.
I'm going to have 1 vol pot, 1tone pot (both 500k) and capacitors, 1 pickup switch (gibson LP style 3 ways). I don't really understand regular schematics so I prefer to work on pictures.
Here the pic of my PUs and components:
(http://img50.imageshack.us/img50/1364/dsc018081ce.jpg) (http://imageshack.us)
and here is another diagram you could use to draw the wires to the components for me... :oops: :D
(http://img203.imageshack.us/img203/9527/wiringbks20fp.png) (http://imageshack.us)
Thank you by advance
Hope you can follow this, the 2 wires soldered together are green and white (like you have now), the centre core from the MQ goes to the switch and the screen to earth.
Thank you that's great, very usefull!
What about the two capacitors do I need them and where?
sorry I didn't see the capacitor on the tone pot...I guess I don't need the other one
Quote from: nick-olasorry I didn't see the capacitor on the tone pot...I guess I don't need the other one
Only one is needed, it should be .02 or .047.
dunno, on my old pots there is a green square lollypop type thing on the tone, and on the volume there is a orange lollypop.
you can use the other capacitor to conect the volume and tone as far as i know, i think you would then run an earth from the back of the volume to the back of the tone.
the second cap i mentioned above would go where phillking put the connecting wire for the two pots.
Quote from: Cattivo Ragazzodunno, on my old pots there is a green square lollypop type thing on the tone, and on the volume there is a orange lollypop.
The 'orange lollypop' is a 0.001 cap, used as a treble bleed when you turn down the volume. A lot of people (me included), think of these as tone killers.
It does? It's very tiny, should I take it off? What about the green one?
Philking...I have a sg 2 tone 2 vol setup...has them orange lollypops on..is it worth removing them?