Bare Knuckle Pickups Forum
Forum Ringside => Guitars, Amps and Effects => Topic started by: littleredguitars2 on December 13, 2014, 05:03:31 PM
-
(http://i.imgur.com/Obi6eSX.jpg)
(http://i.imgur.com/Uo1D8Ct.jpg)
(http://i.imgur.com/CSTqLcB.jpg)
the body, pickguard and neck are from Warmoth. very nice quality. here are some quick stats
color Fiesta Red
wood = alder
pickguard = tortoise shell
neck = quartersawn wenge
standard slim strat neck profile
10-16 compound radius
22 frets, no fret inlays
fingerboard = ebony (black)
pickups = Bare Knuckle Stockholm p90s (humbucker sized)
graphtech xl nut
6150 frets
fender hardtail bridge
switchcraft and cts electronics
fender locking tuners
this guitar plays amazing and the quality of the parts are wonderful. i love this thing. and the pickups are amazing. super mean under high gain but clean up SO WELL. i've used the bridge pickup in another guitar for about a year and its easily my favorite pickup. the neck pickup is also killer. i'll be sure to demo it on my youtube page soon enough
-
Nice :D
-
Yeah, I like Fiesta Red on a strat. Looks badass with that wenge neck. So, no tonecontrol to keep things simple, I guess.
-
Stockholm love! Looks like it is a killer axe, congrats!
-
That`s a pure badazz beauty! Especialy wenge neck!
How do you find standard thin profile? Some people state that when Warmoth says 'standard thin' they realy mean it. Is it realy thin?
-
@tele the only time I ever use a tone knob is with my lpjr. Since it doesn't have a neck pup. Otherwise I just don't use them.
@lucas it is quite thin. But not super thin. I definitely considered the 59 round back profile. I haven't really compared it to my fender necks. If it's different, it's not by much
-
@lucas it is quite thin. But not super thin. I definitely considered the 59 round back profile. I haven't really compared it to my fender necks. If it's different, it's not by much
funny enough, last night I was on the Warmoth user forum, reading about diferent profiles and opinions are quite mixed. 59 roundback and Wolfgang are the most popular.
when it comes to standard thin loads of people were saying it`s really thin. Just wondering about Wizard one, that`s even thinhohoner!
Your strat neck, the wenge one it`s a killer though! is it as smooth and quick as people say?
Congratzz!!!
-
The wenge is actually quite coarse of a wood but it's so nice. Since it doesn't need a finish it's really fast and the ebony is super smooth. I love it
-
The wenge is actually quite coarse of a wood but it's so nice. Since it doesn't need a finish it's really fast and the ebony is super smooth. I love it
agree. I never had a chance o play any exotic wood neck, but according to reviews thanks to being coarse wenge is fast as well.
-
definitely worth checking one out. really nice stuff.
-
I guess the wenge neck influences the tone quite a bit. How compares that to mahogany and maple?
-
from what i'm told it tends to give a bit of a mid boost which is why its seen on a lot of bass necks. but then again i've never used this pickup in this guitar so its hard to really say how different it could be. but i will say that its helped my guitar breath a bit more if that makes sense. it had a maple neck/rosewood board on it for a couple years and while it was great, it was a bit dark. and this new neck seems to have opened that up a bit.
-
Tasty.
-
Lovely. I like the wenge neck
-
Is that Pro construction? How do you find it that double rod? Some people say that it gives heavier neck and kills the tone due to more metal in the neck and less wood. Also I`ve read that the adjusting system might be tricky as well.
cheers.
-
yes its the warmoth pro model. its a little too early to say i guess but it feels normal to me. its not very tricky to use if you follow the instructions. which are basically as follows.. tighten it til its straight at the base.. attach the neck. string it up. detune the strings a little bit. and adjust the neck tension as needed with the side adjustment
-
Thanks,
and what about fret work? As far as I know Warmoth necks come not finished when it comes to frets. They need to be leveled, beveled, polished ect.
Some necks apparently require less fret work, some more.
-
from what i'm told it tends to give a bit of a mid boost which is why its seen on a lot of bass necks. but then again i've never used this pickup in this guitar so its hard to really say how different it could be. but i will say that its helped my guitar breath a bit more if that makes sense. it had a maple neck/rosewood board on it for a couple years and while it was great, it was a bit dark. and this new neck seems to have opened that up a bit.
The ebony board might contribute to that too. My strat has an ebony board and you can hear really the added percussiveness compared to my strat with rosewood fretboard.
-
Thanks,
and what about fret work? As far as I know Warmoth necks come not finished when it comes to frets. They need to be leveled, beveled, polished ect.
Some necks apparently require less fret work, some more.
the fretwork is SOLID as far as i'm concerned. they may need SLIGHT leveling but it would be miniscule. i've bought 3 necks from them and all of them have been radically different and all really great fretwise.
from what i'm told it tends to give a bit of a mid boost which is why its seen on a lot of bass necks. but then again i've never used this pickup in this guitar so its hard to really say how different it could be. but i will say that its helped my guitar breath a bit more if that makes sense. it had a maple neck/rosewood board on it for a couple years and while it was great, it was a bit dark. and this new neck seems to have opened that up a bit.
The ebony board might contribute to that too. My strat has an ebony board and you can hear really the added percussiveness compared to my strat with rosewood fretboard.
yeah its a snappier compared to the rosewood for sure. its great.
-
great guitar littlered! a real hot rod sort of look to it!! the black pickups and wenge neck give it a bit of an edge.
lucas:
i don't think the pro construction kills the tone. but it is alot heavier. i find the truss rod adjustment very straightforward.
in my opinion warmoth necks do need a fret dress, at least the one I have did.
-
thanks! glad you like it. shes a firey one
-
Really cool looking strat. I bet it's a monster!
-
So, with regard to that clip you made of you playing the BKP sample tune on your other Stockholm guitar, are you going to have another crack at that now that you have the neck version? That would be cool.
-
i certainly could. that neck section of the clip is so fast haha. and after playing the guitar for a week or two here are a couple other things i will mention
- yes, the warmoth pro neck is definitely on the heavy side. didnt notice until i played around with some of my other strats. its still super comfortable and not unbalanced at all. but i could see some people not liking it
- i NEED to shield guitar. i have it grounded in a couple places but when i cranked my orange at practice this baby was feeding back really hard. i had to tweak some settings. shielding is one technique i have yet to really practice so i hope to do this soon.
-
I use the shielding paint. It is easier to do and the shield is easier to get complete (by running the brush down the connecting passages) but it is permanent. It can darken the tone of your guitar. The way to avoid that happening too much is to ground the shield completely to the jack. In some places contact will work fine, but I like to run a lead from somewhere in the shield (with paint I screw the wire in and then paint over the screw) to the back of one of your pots.
Also remember to get a multimeter with a good continuity tester to check the continuity of the shielding.
Stockholms definitely require shielding and tend to feed back quite a lot, especially with a gainier amp. I can't get within a metre of my amp, even with shielding, and that's with the NS-2 and Decimator G-String both on.
-
thank you for the tips!
-
No worries. You also need to remember to avoid getting the shielding anywhere near the jack hot. I forgot to mention that
-
i'll be sure to do any shielding under the supervision of my luthier. he's been very helpful and awesome for letting me shadow him quite a bit.