Bare Knuckle Pickups Forum
Forum Ringside => Guitars, Amps and Effects => Topic started by: FELINEGUITARS on May 22, 2015, 02:40:32 PM
-
I've been working on this build for a while now
Mike had seen a guitar we had made last year and wanted something very similar
We wanted to capture a lightly faded 59 LP vibe, but with all the creature comforts and refinements that we like to add:
Three piece quartersawn neck, volute , Dunlop 6100 frets, Earvana Compensated tuning nut, Sperzel tuners, TonePros tunamatic bridge and tailpiece studs, and a lightweight aluminium tailpiece.
Oh ....and our all access neck joint too!
Turned out very nicely too!
The pickups are a pair of Bare Knuckle Pickups Mules wired via a harness with CTS/BKP 550k pots and a pair of Jensen paper in Oil caps - although the neck tone is a CTS500k push pull that coil splits the neck pickup for singel coil sounds.
This is how it turned out
(https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/11288943_856412731060683_9216613043969663954_o.jpg)
(https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/q89/s2048x2048/10454926_856412654394024_969237881594029735_o.jpg)
(https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xap1/t31.0-8/q90/s2048x2048/11059933_856412837727339_202971408491499736_o.jpg)
(https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xat1/t31.0-8/11312582_856412791060677_1798861769449186924_o.jpg)
-
Just what I expect from you Jonathan...a stunner. This one looks so bloody classy. And the photos are amazing as well, great job!
-
Beautiful guitar- I bet it plays and sounds like a dream.
-
Immaculate beauty!
-
My, that's a cutie!
-
Very nice looking Jon
-
Very nice. That neck joint looks great