Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: m t soule on November 24, 2015, 11:36:07 PM

Title: Abraxas in Rg?
Post by: m t soule on November 24, 2015, 11:36:07 PM
What do you guys reckon?
Abraxas bridge, crawler neck in basswood rg?
Title: Re: Abraxas in Rg?
Post by: darkbluemurder on November 25, 2015, 09:25:57 AM
Abraxas bridge should be fine.

Is this a 24 fret guitar? In that case I would consider the VHII neck.

Cheers Stephan
Title: Re: Abraxas in Rg?
Post by: Slartibartfarst42 on November 25, 2015, 01:02:31 PM
The Abraxas and Crawler neck models are pretty much the same anyway, though the VHII is certainly different. Another option you might consider is the Holydiver neck, which is a very light wind but the AV magnet and more modern wire help to give it a bit more articulation.
Title: Re: Abraxas in Rg?
Post by: m t soule on November 25, 2015, 01:25:46 PM
I already own the Cr neck lying round and was looking for a good match for it.
It seems i wasnt far of with the abraxas then!
The vhii would be a very different feel to a crawler which is fat n round.

Im going to using the guitar (yes 24 fret) to experiment with. Things like altered tunings, dropped tunings, ambinent sounds. Nothing too aggressive but keeps that option open a little.
Title: Re: Abraxas in Rg?
Post by: darkbluemurder on November 26, 2015, 09:27:19 AM
The Abraxas and Crawler neck models are pretty much the same anyway

Spec-wise they are similar but they do sound different. Abraxas is noticeably brighter. I had them back to back in the same guitar.

Cheers Stephan
Title: Re: Abraxas in Rg?
Post by: m t soule on November 26, 2015, 03:47:21 PM
Are you rdfering to Cr bridge to Ab bridge or Cr neck to Ab bridge.
Its the latter i am looking for info for

The Abraxas and Crawler neck models are pretty much the same anyway

Spec-wise they are similar but they do sound different. Abraxas is noticeably brighter. I had them back to back in the same guitar.

Cheers Stephan
Title: Re: Abraxas in Rg?
Post by: darkbluemurder on November 27, 2015, 09:41:14 AM
I was talking about the neck pickups - both AWG 42 plain enamel and A4 magnets, Crawler neck being wound a bit hotter going by DC resistance. I would not have expected the Abraxas neck to be a lot brighter than the Crawler neck but it was in that particular guitar I had both in.

Cheers Stephan
Title: Re: Abraxas in Rg?
Post by: Sothoth on November 28, 2015, 07:16:10 PM
I was talking about the neck pickups - both AWG 42 plain enamel and A4 magnets, Crawler neck being wound a bit hotter going by DC resistance. I would not have expected the Abraxas neck to be a lot brighter than the Crawler neck but it was in that particular guitar I had both in.

Cheers Stephan

+1

At least in my rig, they sound almost identical except the Crawler is higher output.  Different woods or amps may skew the sound as well.
Title: Re: Abraxas in Rg?
Post by: m t soule on November 30, 2015, 03:27:02 PM
I took the plunge on the abraxas bridge.
Wow......never expected any of that.
Its brilliant........