Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: maxingwell on May 05, 2016, 03:19:47 PM

Title: Wiring help - please
Post by: maxingwell on May 05, 2016, 03:19:47 PM

Hi,

I want to do this to my ibanez RG but am struggling a bit.... http://www.guitarelectronics.com/product/WD1H10_03/Guitar-Wiring-Diagram-1-Humbucker1-VolumePull-for-South-Single-Coil.html (http://www.guitarelectronics.com/product/WD1H10_03/Guitar-Wiring-Diagram-1-Humbucker1-VolumePull-for-South-Single-Coil.html)

Can anyone help with what colour wires go where. I have a volume pot, an off-on-off switch and a 4 conductor aftermath.
I don't have much hair left and would really like to not pull the rest out ;-)

Thanks.

Title: Re: Wiring help - please
Post by: Cider on May 09, 2016, 07:53:46 AM

Here you go: https://bareknucklepickups.co.uk/main/downloads/schematics/general/humbuckers/humbucker_colour_code_conversion_chart.pdf

Red goes to the top, Green and White soldered together and goes to the middle, and black & bare (buncha tiny silver wires) soldered together and goes to the bottom.

Title: Re: Wiring help - please
Post by: maxingwell on May 11, 2016, 02:40:46 PM

Sorry Cider - I've just seen your reply. Many thanks for posting this (I think I was blinded by searching too much!). I'll give this a go tonight.
Thanks again  :smiley: