Bare Knuckle Pickups Forum

Forum Ringside => Players => Topic started by: Kride on June 18, 2016, 06:07:30 PM

Title: BKP Cold Sweat doing Killswitch Engage
Post by: Kride on June 18, 2016, 06:07:30 PM

Got these today, digging!

I had previously a budget set in the guitar (Tonerider Generator pickups) and these (BKP CS) got way more definition. The Toneriders aren't bad either and I recommend everyone to check them out. On par with most Dimarzio and Seymour Duncan stuff.

Anyways... I recorded first with the Toneriders and gulped a few beers a long with recording and soldering so the CS tracks might not be as tight xD

The modeling software (Bias FX) makes the differences very marginal but whatever. When I tracked the guitars the CS was way more articulate and had less muddy low end. Better attack as well. All in all, there is a difference.

https://soundcloud.com/krister-virtanen/tonerider-generator-the-reckoning-by-killswitch-engage
and
https://soundcloud.com/krister-virtanen/bare-knuckle-cold-sweat-the-reckoning-by-killswitch-engage



edit: Here's the clips without bass guitar.
https://soundcloud.com/krister-virtanen/bare-knuckle-pickups-cold-sweat-the-reckoning-by-killswitch-engage-without-bass-guitar
and
https://soundcloud.com/krister-virtanen/tonerider-generator-the-reckoning-by-killswitch-engage-without-bass-guitar



Here's the guitar, I've done 'a few' mods compared to the original PRS SE Åkesson

(https://c2.staticflickr.com/8/7396/27650646512_750e737bdd_b.jpg)
(https://c2.staticflickr.com/8/7363/27650646252_21767b2645_b.jpg)


Cheers!

Title: Re: BKP Cold Sweat doing Killswitch Engage
Post by: Dave Sloven on June 18, 2016, 07:02:02 PM

I agree with your assessment regarding the improvement of the CS over the Toneriders