Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: bednarczyk49 on November 28, 2016, 01:57:19 PM

Title: Wiring series parallel
Post by: bednarczyk49 on November 28, 2016, 01:57:19 PM

Hello Bare Knucklers,
Looking for a wiring diagram for:   2 BK humbuckers, 2 volumes, 2 tones, 3 way toggle.  Push pull series/parallel on the volume.  Prefer 50s wiring but I could extrapolate if you can direct me to a modern version. 
Thanks,
George

Title: Re: Wiring series parallel
Post by: Dave Sloven on November 28, 2016, 02:21:43 PM

There are schematics on the following page.

https://bareknucklepickups.co.uk/main/schematics.php

There is not one exactly for what you want.

You should be able to work it out by using the '2 Hum 2 Vol 3 Way Toggle Push Pull Master Tone Coilsplit' schematic but just wire the push-pull switch as it says on the '1 Hum 4 Con Pushpull Pot Series Or Parallel' schematic

There is also a '2 Hum Braided 2 Con 50S Wiring 2 Vol 2 Tone 3 Way Toggle 0.022Mfd 0.015Mfd Caps' that shows how to wire up the red for '50s style.  Just treat the braided wire as a red (hot), run the black and bare (ground) to the back of the pot.

Title: Re: Wiring series parallel
Post by: bednarczyk49 on November 28, 2016, 06:25:45 PM

Thanks Agent Orange,
I'll see if I can figure it out. 
Much appreciated.