Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: justjaketx on September 13, 2017, 01:44:00 PM

Title: push/pull switch mods and wiring help
Post by: justjaketx on September 13, 2017, 01:44:00 PM

I'm about to install a humbucker in the neck and p90 in the bridge position with two push/pull volume switches.   My plan is to split the coils in the humbucker and I wanted to use the bridge switch for parallel/series.  Help on where to find a diagram for this would be greatly appreciated. Also, any other ideas or mods for this set up are welcomed.