Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: pSt on May 04, 2006, 11:47:32 PM

Title: PRS wiring
Post by: pSt on May 04, 2006, 11:47:32 PM

I've got a PRS Signature with a 5-way rotary switch and sweet switch (in/out of phase I think).
Soon I will get my Miracle Man bridge and Mule neck (4 conductors), and I'm wondering if I could install them myself or if I need a tech.

I have some electronics experience, but I've never installed a pickup before. But I'm thinking, can't I just look at how my current pickups are installed and then just copy it over to the new ones. Just solder the new ones where the old was. Should be pretty easy, right? Or am I missing something vital?

Title: PRS wiring
Post by: sgmypod on May 06, 2006, 03:41:43 PM

as long as the originals have the same amount of wires as the new ones, heres a prs diagram http://www.stewmac.com/freeinfo/I-PRS.html.....but looking at prs diagram ain't the easiest to fit