Bare Knuckle Pickups Forum
Forum Ringside => Guitars, Amps and Effects => Topic started by: _tom_ on June 26, 2006, 06:03:09 PM
-
I'm gonna do some of the mods on this page to my Vox wah -
http://homepage.ntlworld.com/s.castledine/greenfuz/wah.html
I just dont know where to get the appropriate resistors for it, maplin has so many and just confuses me :P Any ideas?
Thanks
-
If you follow the links to Stuart's homepage I believe you will find he sells everything you will need to mod your wah.
I would advise getting one of his inductors if you're modding your wah - they totally rule! (I sold my RMC3 after getting one of Stuart's wah PCBs)
:twisted:
-
do you know this site?
http://www.wah-wah.co.uk/
-
Tom - these were the pages that I used to have bookmarked but lost when I had to reinstall my computer
See here for Battery bypass
http://homepage.ntlworld.com/s.castledine/greenfuz/wiring.html
-
Tom - these were the pages that I used to have bookmarked but lost when I had to reinstall my computer
You should start using a Mac, Feline :)
-
aha thanks alot feline, although I have a new way of powering my pedal, I just wired a battery clip onto the end of one of the wires that goes to my power bank, then I just clip that onto the battery clip which is allready inside the wah :) I didnt know that the site with those mods also sells parts, thanks alot.
And hunter, I knew about wah-wah.co.uk but I didnt remember them selling resistors, I'll have to have a look again.
-
Also see www.musikding.de, they have a good selection of components for stompboxes/wahs, postage reasonable, takes about a week/ten days. Or Small Bear Electronics in the US, www.smallbearelec.com, again postage reasonable and quick.
-
do you know this site?
http://www.wah-wah.co.uk/
I've read great things about this guy, and have every intention of saving some pennies to get my knackered old Thomas Organ Crybaby fixed up/souped up by him so that it stops collecting dust at the bottom of my closet and starts wailing again! :)
Then I should probably get my stock JH-1 modded, too :)
-
Tom - these were the pages that I used to have bookmarked but lost when I had to reinstall my computer
You should start using a Mac, Feline :)
I am using a Mac but my version of MS office got so corrupted that i went for a full reinstall - so it is Bill Gates' fault really
I have that level of smugness that only OS X users can muster
-
Haha...
I HATE MACS! MACS MUST DIE!
Admittedly Windows is a pain in the arse to make work, but at least it's not a load of shite when it does work :drink:
-
For resistors and such in the UK, you can get anything you want from RS or Farnell - even Maplins should have most things you will need. I have dealt with Smallbear in the US and they are top notch, but why get stuff from the US when you can get 'em easily enough right here in the UK.
:twisted:
-
Will these be fine for the mods on the link I posted -
http://www.maplin.co.uk/search.aspx?MenuNo=13798&MenuName=Metal%20Film%20Resistors&FromMenu=y&criteria=Metal%20Film%20Resistors&doy=29m6&worldid=3
Thanks!
-
yeah, they're basically 1/2watt resistors - they're what I use for all my 'pedal' stuff. tolerence is 1% too so they're good for getting repeatable results if you're making more than one pedal.
:twisted: