Bare Knuckle Pickups Forum
Forum Ringside => Pickups => Topic started by: Tricalibur on July 20, 2006, 01:43:37 AM
-
I have an Epiphone SG Custom with three Humbucking pickups in it(stock). Would it be posible to order a calibrated set of 3 Humbuckers? That is Neck-Middle-Bridge. If So I was thinking of saving a lil extra dough so I could afford like two Warpigs for the neck and middle positions and then I would put a different type of pup in the bridge for a totaly different type of lead sound from thu two warpigs. Thing is I realy cant figure out what pup might be able to both mix well with the pigs as well as be able to cut realy well when i flick thu selector switch to 'bridge' for solos. I know that I want it to have a single row of allen bolts so as to match the pigs visualy but wont that affect the high end respone of the pup? Either way I figure I could prob get Tim to wind it Ceramic to compensate for the lost treble. Anyways, I dont realy know a whole lot about which BKP's realy excel at lead tones so i thought Id get yall's suggestions / opinions?
-
2 Warpig Necks and a Ceramic Warpig Bridge.
\m/
Metal as!
-
yeh that would look badass as hell, but SO many polepieces
......
......
-
......
......
-
......
......
\mm/ (too much metal for one hand, might need three in fact)
-
We've done plenty of 'trio' humbucker sets and can calibrate all 3 easily depending on what you'd like.
-
My Only concern would be that it might sound kind of muddy with all three hums on full volume as it is with my current pups.
-
My Only concern would be that it might sound kind of muddy with all three hums on full volume as it is with my current pups.
Stock Epi pickups are not the worst I tried, but they aren't exactly quality items. When/if you upgrade you'll find BKPs sound quite alot better, more precise and less muddy. You might also like to check the existing wiring of the guitar. My Epi Flying V was wired in quite a bizarre way, which made it sound really muddy when rolling the volume down.
-
Well mines got three volume pots and I think that might be contributing to it also. Either way though the main thing I wanna be able to do with the BKP's is run them all at max volume and still get a clear signal. W/ my current set-up I have to turn the mid pup almost all the way down w/ the selector in the middle position to get a decent, clear tone that isnt muffled or muddy.