Bare Knuckle Pickups Forum
Forum Ringside => Players => Topic started by: thorology on September 12, 2006, 02:33:54 AM
-
Hey guys, I'm new here. I'm thinking about getting the Nailbomb but since I'm in Iceland that's not as easy as jazz to get around to. So what I need is a clip of a Les Paul with Nailbomb in the neck position with fuzz, preferably Zvex Fuzz Factory. If you guys could be so kind and help me out with this I would be so thankful!
Cheers, Thor
-
I would also like to hear this as i have a les paul and a fuzz factory. Would particuarly like to know how it sounds on an overdriven amp + Fuzz Factory. :)
-
overdriven amp + Fuzz Factory. :)
and that combination doesn't sound terrible??? my fuzz factory sounds awful with any overdrive on the amp
-
overdriven amp + Fuzz Factory. :)
and that combination doesn't sound terrible??? my fuzz factory sounds awful with any overdrive on the amp
mine goes squeeeeeeeeeeeeek.... and then rock! I love the way it just turns the sound into a wall of noise when I have sligth OD on my amp.
-
What amp u got? Its got to be a tube amp! Sounds good on mine.
-
i've got a cr@ppy AVT
probably why it sounds terrible
-
i've got a cr@ppy AVT
probably why it sounds terrible
must be the case. sound sweet on the tubes. but how about that clip guys? can anyone get around to it?
cheers
-
i have the fuzz factory built in my custom with nailbombs running through a JCM800. it sound amazing so get one :D
-
i have the fuzz factory built in my custom with nailbombs running through a JCM800. it sound amazing so get one :D
:o
i want your guitar
-
Just thought id show off my baby as you want it soo bad :P hehe sorry dude it had to be done.
(http://i106.photobucket.com/albums/m260/fixxxer1988/DSCF2177.jpg)
A look at the controls (alot simpler than you imagine)
(http://i106.photobucket.com/albums/m260/fixxxer1988/DSCF2179.jpg)
the guitar also has a trem setter, custom floyd rose and pickup splitters[/code]
-
gah, wouldve been soo much better if it were a les paul custom
-
dnt like how pauls feel im afraid
-
:(
i love les pauls
-
well ive tried a few and tried to like them, i like the sound of one loaded with nailbombs but dnt like the feel. PRS CU22 now they are nice guitars with BKP perfect.
l be getting one in the next few weeks :D
-
i'm not a big PRS fan anymore, too shiny
-
lol too shiny
-
Has anyone put the fuzz factory + nailbomb clip up yet? i wanna hear it too. :( I'm with caffeine junky on this les pauls ruletheth :D but to be fair all the controls wouldn't look quite right on it
-
dnt like how pauls feel im afraid
I don't particularly care for the feel much... and I own one too.... but their sound is where it's at.
-
dnt like how pauls feel im afraid
I don't particularly care for the feel much... and I own one too.... but their sound is where it's at.
I'm with you dean. Although i have big plans for my LP - getting rid of that finish on the neck straight away :twisted:
-
Ahhh removing finish on the back of the neck; another thing i should really do. How do you plan to do it and have you got any tips indysmith? :)
-
i used steel wool when i did mine, worked wonders
-
Cheers Junkie. Ok, looks like I'm steel wool-ing the whole guitar then (see one of the other threads) should be interesting when its complete with the new hardware and such. Where would I get fine stuff (eg. 0000 grade) any hardware store or would I need to go somewhere special.
-
i used axminster, got the 250g lot, and only used about 1g of it, so you should be able to do your entire guitar with one pack easily, but i'd recommend doing your neck before anything else, as that is not as noticable as the front of your guitar, plus it's the best place to make matte finish :D:D