Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: Jonesy on September 26, 2006, 04:54:06 PM

Title: New nut
Post by: Jonesy on September 26, 2006, 04:54:06 PM

Greetings...The locking nut on my Maverick screws into the neck form the front...it needs replacing but I cant find another quality nut that screws in from the front...Any ideas?

Do the Ibanez Edge pro nuts go from the front??

Cheers guys

Title: New nut
Post by: Twinfan on September 26, 2006, 05:04:53 PM

Nope - Ibanez nuts screw in from the back...

Title: New nut
Post by: gingataff on September 27, 2006, 02:10:42 AM

The nut on my Charvel screws in fronm the front, and that uses the Schaller floyd rose, I'm not sure if that's the standard nut for that model but you might want to check out schaller or stewmac.

Title: New nut
Post by: Kilby on September 27, 2006, 02:36:24 AM

My Peavey Wolfgang is screwed in from the front, so lave a look at the peavey site.

Rob...

Title: New nut
Post by: PhilKing on September 27, 2006, 11:55:37 AM

Schaller Floyd Rose nuts have both mounting types.  They come with all the hardware for either top or bolt through mounting.

Title: New nut
Post by: lp_man on September 27, 2006, 08:06:53 PM

Have you tried sending an e-mail to maverick about spares? :)

-Will

Title: Re: New nut
Post by: FELINEGUITARS on September 27, 2006, 11:28:37 PM

Quote from: Jonesy

Greetings...The locking nut on my Maverick screws into the neck form the front...it needs replacing but I cant find another quality nut that screws in from the front...Any ideas?

Do the Ibanez Edge pro nuts go from the front??

Cheers guys

Contrary to what Twin fan said - many of the Ibanez locknuts Do screw from the front (as well as the rear).

Just a question of getting the right one....
The Ibanez ones may be best as they suit a flat radius neck
What colour do you need?

Title: New nut
Post by: Twinfan on September 28, 2006, 08:12:49 AM

Oops - sorry.  I was just going off my RGs with the original Edge or Lo Pro.  I guess the other trems might be different.

Apologies...