Bare Knuckle Pickups Forum

Forum Ringside => Guitars, Amps and Effects => Topic started by: keano on January 23, 2007, 07:02:59 AM

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 23, 2007, 07:02:59 AM

Just wanted to compare TSL VPR against the 100 watts of each. What sucks is I am not making music any more all I f**king do is make clips lately and can't stop. Depressing seriously. Anyway playing is cr@p timing is off but I am burned out and one take is all I am gave it. So take a listen.

These are the high gain clips. Same thing blind test just your favorite out of the folder.

Thanks for feeding the obsession!

Each folder contains a similar riff. Out of those folder you pick the one you like best.
ex:
A - 4
B - 8 so on

http://media-creations.net/clips2.html

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 23, 2007, 11:10:33 PM

bump

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: gwEm on January 24, 2007, 01:59:41 PM

more marked differences this time.

favourites are:

1 from group A
10 from group B
16 from group C

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 24, 2007, 05:51:36 PM

thanks. so far A is  clear winner from this and other forums. Debate on C still

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: genocidal tendencies on January 24, 2007, 06:40:48 PM

I can't get the page to load, is that just me?

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 24, 2007, 07:02:18 PM

I tested it it works
http://media-creations.net/clips2.html

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: genocidal tendencies on January 24, 2007, 07:18:53 PM

Me too now, how odd.

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: Peter Antal on January 24, 2007, 07:43:17 PM

A - 7
B - 10
C - 19

:)

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: Canadian Steve on January 24, 2007, 09:37:17 PM

A - 1
B - 12
C - 17

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 25, 2007, 03:07:43 AM

Thanks guys answers are:

A.
1. JCM800 Hot Plate -4, Vol. 2.5 w/SD-1 Keeley 9-11-12
2. TSL in 25VPR mode, Vol.3, Gain 8
3. Same as 3 but with ZW-44 OD.
4. TSL full 100 watts. Gain 8 Vol 2 used clean boost on solo
7. Same as #1 but with HP-8 and vol. 3

B
8. Same as 3
9. Same as 2
10. Same as 1
11. Same as 4
12. Same 1 BUT using MXR EQ +6 +6

C
16. same as 3
17. same as 2
18. same as 4
19. same as 1

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: Peter Antal on January 25, 2007, 10:08:02 AM

Seems like people preferred the JCM800 this time. Nice thread! 8)

Title: TSL 100 vs. JCM800 2203 metal clips
Post by: keano on January 25, 2007, 04:43:01 PM

Also posted this at MArshall amp forum and Seymour Duncan forum. and results were A-1, B-10, C-18 had edge and 19 close behind.