Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: coffinfeeder on January 28, 2007, 12:11:55 AM

Title: Bareknuckle for death metal?
Post by: coffinfeeder on January 28, 2007, 12:11:55 AM

Hello,

I play a Flying V baritone and looking to replace the bridge humbucker.  which Bareknuckle would be good for Morbid Angel, Deicide, Cannibal Corpse, Dark Funeral, etc?

I need clarity and definition for ultra fast picking rhythm crunch and solos.

the guitar is 28-5/8" scale bolt-on with maple neck, alder body, ebony fingerboard, and tune-o-matic bridge.

thanks

Title: Bareknuckle for death metal?
Post by: Neemo on January 28, 2007, 03:22:36 AM

Nailbomb

Title: Bareknuckle for death metal?
Post by: Davey on January 28, 2007, 10:00:44 AM

warpig, nailbomb, miracle man, custom warpig.


pick one, you wont be dissapointed

Title: Bareknuckle for death metal?
Post by: maliciousteve on January 28, 2007, 10:33:55 AM

There's some great death metal clips in the players section. Using Warpig's and Nailbombs. Look for a post by a guy called 'Drac'.

Title: Bareknuckle for death metal?
Post by: BloodMountain on January 28, 2007, 10:34:20 AM

i would say for the heaviest tones, go for Warpig or Ceramic Warpig. there are loads of heavy clips in the "players" section of them if you search.

Title: Bareknuckle for death metal?
Post by: MDV on January 28, 2007, 02:39:53 PM

The ceramic warpig is the best pickup for death metal there is. But that.

Title: Bareknuckle for death metal?
Post by: coffinfeeder on January 28, 2007, 04:44:34 PM

hey thanks

the Ceramic Warpig sounds sinister

what about a neck humbucker to go along with it?  something for true clean tones?

Title: Bareknuckle for death metal?
Post by: MDV on January 29, 2007, 12:24:10 AM

Are you also going to be using the neck for leads?

Title: Bareknuckle for death metal?
Post by: coffinfeeder on January 29, 2007, 04:07:49 AM

probably not, mainly just for cleans, since I understand the ceramic Warpig cannot clean-up.

Title: Bareknuckle for death metal?
Post by: Hell Hound on January 29, 2007, 10:09:00 AM

Neck Warpigs are always alnico V, and from the clip i've found here, it cleans up nicely :)

Title: Bareknuckle for death metal?
Post by: 99_not_out on January 29, 2007, 12:10:42 PM

I've got a neck warpig (alnico) in an SG, and it cleans up very well. Gives a very deep and well rounded tone, perfect for metal cleans IMO. Think the intro to Enter Sandman.