Bare Knuckle Pickups Forum

Forum Ringside => Tech => Topic started by: sgmypod on March 08, 2007, 01:33:18 PM

Title: Swap coil tap
Post by: sgmypod on March 08, 2007, 01:33:18 PM

have a nailbomb want to swap coil tap to the slug rather than the scew hoow do I do this...what colours do I connect etc

Title: Swap coil tap
Post by: Twinfan on March 08, 2007, 01:41:34 PM

Swap black and red, which is pot tag and back of pot  ;)

Title: Swap coil tap
Post by: sgmypod on March 08, 2007, 01:48:06 PM

ta dave...does that change phase with other pickup?

Title: Swap coil tap
Post by: Twinfan on March 08, 2007, 04:14:09 PM

Errrrr pass????  It'll be the same polarity but with reverse winding???

Title: Swap coil tap
Post by: Philly Q on March 08, 2007, 04:27:33 PM

It would change the phase relationship between the two pickups, certainly in humbucking mode.  

Not sure if the "single coil" would be out of phase with the neck pickup in split mode, though.   :?

Title: Swap coil tap
Post by: sgmypod on March 08, 2007, 04:46:02 PM

thanks have worked it out sounds great now have Mqueen neck and nailbomb bridge.....was scared when I had to drill a little...gordon smith don't leave a lot of room for pickups