Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: yZeCounsel on April 05, 2007, 06:52:17 PM

Title: ALNICO II Mules when tapped?
Post by: yZeCounsel on April 05, 2007, 06:52:17 PM

Okay I did a search specific to this site with these terms

coil tap Mules alnico  HERE (http://www.google.com/search?hl=en&q=site%3Abareknucklepickups.co.uk+coil+tap+Mules+alnico&btnG=Search)

I was not able to glean  any information available on how the  ALNICO II Mules (NOT THE ALNICO IV) sound when tapped or split.

Anyone try this?

I am trying to decide between the 4 conductor or 2 conductor ALNICO II'S

Title: ALNICO II Mules when tapped?
Post by: Peter Antal on April 05, 2007, 07:47:14 PM

I'd order 4-conductor and try the split mode. If you don't like it, just wire it in a regular way. You'll only have to desolder the coil tap (I think green and white wire soldered together) from the switch and tape it out of the way.

Title: ALNICO II Mules when tapped?
Post by: rockguitarstar on April 06, 2007, 09:57:04 AM

I cant tell you on the tapped aspect of the pickups, but I have the mules alnico II's in a PRS singlecut and I couldnt have asked for a better pickup, i would go for it...

Title: ALNICO II Mules when tapped?
Post by: Peter Antal on April 06, 2007, 10:27:13 AM

You can also buy them with Alnico III. It all depends on your guitar and the sound you're after.