Bare Knuckle Pickups Forum
Forum Ringside => Tech => Topic started by: Simon D on June 01, 2007, 03:10:44 PM
-
I'm shortly going to be putting my Warpigs into a new guitar, and I've realised I don't know which way round they're supposed to go in terms of which coil is which - the problem is identifying which is the 'screw' coil, and which is the 'slug', as the Warpig has screws through both coils. Is there a simple way of telling that I've missed, or does it not make any difference?
Edit: Don't know if it makes a difference, but my 'Pigs are open poled.
I'd be very grateful if someone could help me out on this, as I really don't want to mess it up.
Cheers,
Si
-
the wire should be on the bottom left corner of the pickup when putting into the cavity
hope that helps
note this is when looking at the front of the guitar face one
-
Bridge pickup has cable bottom right when looking at the top of the pickup
Neck pickup has cable top left
-
Thanks guys, that's put an end to my confusion. Cheers for your help.