Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: splawnster on June 29, 2007, 05:18:54 PM

Title: wiring diagrams or help Holy diver bridge
Post by: splawnster on June 29, 2007, 05:18:54 PM

wiring to a single volume pot he white and green are soldered together,  the black goes to the pot post and the red and bare to ground
 Or is should it be like a seymour duncan red and whit together black to post and green and bare to ground.

Title: wiring diagrams or help Holy diver bridge
Post by: TwilightOdyssey on June 29, 2007, 05:31:09 PM

There should have been a wiring diagram included with the pickup. I know that BK does not use SD's wiring scheme, but I don't know what it is, as I have someone else do my wiring for me. PDT_008

Title: wiring diagrams or help Holy diver bridge
Post by: splawnster on June 29, 2007, 05:33:19 PM

I found this
What is the Bare Knuckle Four conductor colour code?
Black =start of screw coil
White = finish of screw coil
Red = start of slug coil
Green = finish of slug coil

For standard series operation solder the red to the pot tag, the black to ground(usually the back of the pot casing) and solder the green and white together.

Title: wiring diagrams or help Holy diver bridge
Post by: splawnster on June 29, 2007, 05:44:09 PM

Found the wire diagram that came with the pickup. white and green together, red to volume post  and black and bare to ground. I'll post my thoughts of the HD later.