Bare Knuckle Pickups Forum

Forum Ringside => Pickups => Topic started by: Will on July 14, 2007, 05:58:21 PM

Title: Gibson dirty fingers - BK replacement
Post by: Will on July 14, 2007, 05:58:21 PM
Well any clues?
i have an old XR1 and the local guitar tech says that my pickups are low output  :?  whereas they look like the stock dirty fingers, i assume the magnet may have died.
So it leaves an excuse for some BKPs...
Title: Gibson dirty fingers - BK replacement
Post by: Elliot on July 14, 2007, 06:11:14 PM
Isnt the Cold Sweat a development of the Dirty Finger?
Title: Gibson dirty fingers - BK replacement
Post by: shaman on July 14, 2007, 06:36:24 PM
Cold Sweat it is-check out product description-Sykes yikes!
Title: Gibson dirty fingers - BK replacement
Post by: Tim on July 14, 2007, 07:25:17 PM
There are several things that usually get done to Dirty Fingers to make them sound better. One is remove the two flanking magnets which cleans the tone up, and the second is to remove the copper screening tape from around the coils which plays hell with the inductance. The answer is Cold Sweat!
Title: Gibson dirty fingers - BK replacement
Post by: Will on July 14, 2007, 07:34:50 PM
Oooooh thankyou
that it shall be then, when i get a few bills paid and money sorted anyway
Can Tim do the double screw polepiece thing also? just to look like the originals
Title: Gibson dirty fingers - BK replacement
Post by: indysmith on July 14, 2007, 09:27:46 PM
yes :D - just specify that in box at the end of your order
Title: Gibson dirty fingers - BK replacement
Post by: Doadman on July 15, 2007, 08:05:51 AM
I have a set of Cold Sweats in my Ibanez and can confirm that they are awesome. The tone I get is far more than merely a facsimile of the Dirty Fingers so my guitar retains its own character but it is undeniable that it has a very 'Gibson' feel to it. I've always loved the tone of a Gibson but I've never really thought of it as my ideal guitar, partly because I prefer double cut guitars and partly because I don't have that much spare cash! With Cold Sweats in mine I feel that my guitar will stand up to any comparison with a Gibson favourably. It 'out-Gibsons' a Gibson if you like.  :D
Title: Gibson dirty fingers - BK replacement
Post by: ericsabbath on July 15, 2007, 11:26:08 AM
Doadman,

damn you, man  :evil:
stop making me want another guitar just to buy a bridge cold sweat!  :lol:
Title: Gibson dirty fingers - BK replacement
Post by: PhilKing on July 15, 2007, 12:20:16 PM
Quote from: Will
Can Tim do the double screw polepiece thing also? just to look like the originals


You can get them like this, but they will have more bass (I know because I have a Nailbomb with double screws and a regular Nailbomb, so I could compare them).
Title: Gibson dirty fingers - BK replacement
Post by: psy on July 15, 2007, 05:31:18 PM
The Cold Sweat is nice like.  I have one in a Mockingbird
Title: Gibson dirty fingers - BK replacement
Post by: Doadman on July 15, 2007, 07:24:23 PM
Quote from: Eric Hellstyle
Doadman,

damn you, man  :evil:
stop making me want another guitar just to buy a bridge cold sweat!  :lol:


 :roll: Just doing my bit to spread the word about a pup that is often unfairly overlooked imo  :wink:

Enjoy your new guitar  :twisted:
Title: Gibson dirty fingers - BK replacement
Post by: Will on July 15, 2007, 07:52:26 PM
Can the open zebra coil be aged?
specifically i would say 27 + 1/2 years... 8)
Title: Gibson dirty fingers - BK replacement
Post by: Elliot on July 16, 2007, 02:07:45 PM
Yes - although perhaps not with that exact precision :) - just state aged coils in the purchase box (or phone BKP up when you are making your order!)
Title: Gibson dirty fingers - BK replacement
Post by: CJ on July 18, 2007, 10:46:12 PM
hey, i've got an xr-1 too, obviously with the dirty fingers. those pickups in that guitar actually sound really good. i put a miracle man in the bridge in my v and it sounds almost identical to the bridge dirty finger in the xr-1.
now obviously they're too completely different guitars, but i'm saying that you have some real nice pickups in there. i'd leave them stock and put some BK's in a different guitar if you have another.
Title: Gibson dirty fingers - BK replacement
Post by: Will on July 18, 2007, 10:55:37 PM
another XR1.... whoaa lol haven't seen many

well i am led to believe the pickup has degraded, sure it sounds ok, but it doesn't match what it should do, and by no means is giving the listed output. I am heading for a MM for another guitar everntually... all in the good name of promoting UK business  :D
Title: Gibson dirty fingers - BK replacement
Post by: CJ on July 19, 2007, 04:06:55 AM
yeah its a great guitar. sometimes i wish it sounded more like a traditional LP, but then again its cool to have something different. what color is yours?
Title: Gibson dirty fingers - BK replacement
Post by: Will on July 19, 2007, 08:31:49 AM
the goldburt i think, except mine has a kahler trem on it, its a flatmount kahler which isn't ideal really lol
how about you?
Title: Gibson dirty fingers - BK replacement
Post by: CJ on July 20, 2007, 10:07:19 PM
Quote from: Will
the goldburt i think, except mine has a kahler trem on it, its a flatmount kahler which isn't ideal really lol
how about you?


mines the goldburst too (i think). black with the gold burst on the front, back, and back of the neck? i really like it.