• Welcome to Bare Knuckle Pickups Forum.
 

7-String EMG routing size question.

Started by _Rebourne_, January 20, 2008, 05:37:02 AM

Previous topic - Next topic

_Rebourne_

Hi,

I have a 7-String that has EMG 707's in it and I want to replace them with a ceramic warpig bridge and a cold sweat neck.  However, the EMG's appear to be a bit larger than normal pickups.  

So I was wondering if the Warpigs and such will fit into the guitar?

Transcend

i have also wondered this in the past as the emg707s are fitted into bass guitar pickup cases arent they?

WezV

emg 707 is 3.5" long by 1.5" wide

a 7 string humbucker is about 3" long by 1.5" wide without the tabs so by the time you have a mounting ring it should just about cover the hole but you might not have anywhere for the screws to go.  

I havnt swapped pickups like these before but i reckon it should work with minimal problems.  Possibly need to add some wood for the ring to attach to  and maybe remove some so the pickup fits neatly

personally i would get the pickups and mounting rings and possibly end up modifying the mounting rings with a bit of old scratchplate material if things didnt quite fit nicely
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Will

Would it be possible to make a mounting ring out of the bass sized pickup covers?

Transcend

maybe if you ask tim at a small cost hell make you the pickup a different size?