Author Topic: PRS Mira Vintage Mahogany - Very nice indeed. (Read 5197 times)

Philly Q · « **Reply #15 on:** February 25, 2008, 02:30:05 PM »

Quote from: LazyNinja

Quote from: Philly Q
(EDIT: Bloody hell, that picture's giving me GAS and I've already got a Mira!! :( :roll: )

:lol: You've got a really bad case of GAS Philly!!

'Tis true. It's because of that lovely wood grain. If you look at the "vintage mahogany" one on the PRS website it just looks like poo brown, very boring.

Dakine · « **Reply #16 on:** February 25, 2008, 03:00:43 PM »

Quote from: Twinfan

Yep, they're uncovered SC245 pups.

I find them similar to my Riff Raffs, or maybe an Alnico V Stormy Monday? They're low output and clear.

Low output but sound VERY different in my 245, very vintage,thick/chewy = WOW :lol:

sambo · « **Reply #17 on:** February 25, 2008, 05:42:05 PM »

^All this bloody PRS talk is hurting my brain.

My next guitar will be a PRS- no question.

Dakine · « **Reply #18 on:** February 25, 2008, 07:15:53 PM »

Quote from: sambo

^All this bloody PRS talk is hurting my brain.

My next guitar will be a PRS- no question.

^ Positively Resist Spending ((frivolously)) , (PRS=Sambo) ;)

sambo · « **Reply #19 on:** February 25, 2008, 07:19:02 PM »

:lol: :lol: :lol:

But I need a new amp first!... Well I don't... but I want one. :lol: :oops: :oops:

But my next GUITAR... my next guitar will be a PRS, oh yes.

Dakine · « **Reply #20 on:** February 25, 2008, 07:21:02 PM »

< is not holding breath :P

sambo · « **Reply #21 on:** February 25, 2008, 07:26:14 PM »

:oops:

I'm not very reliable am I?

Well if you would not sell your Singlecut trem, and wait until I have enough cash (HOWEVER long that may be :lol:), then I can GUARANTEE my next guitar will be a PRS. 8)

(I personally think you should just lend it to me indefinitely though. 8) )

FernandoDuarte · « **Reply #22 on:** February 25, 2008, 09:52:30 PM »

Getting off topic!

Could some PRS-owner tell me the measures of the headstock of PRS??? I'm going to build the neck of this Warmoth body, with a PRS headstock:

JustBecos · « **Reply #23 on:** February 25, 2008, 10:20:59 PM »

I am presuming the se headstocks are the same here

width

at nut 11/16

widest point 3" 5/8

at lower top piont ( right handside as you look at it ) 2 3/16

lenght

from back of nut to widest point left hand side 1" 1/8
from back of nut to widest point right hand side 1" 3/16

from back of nut to lenght point left hand side 5"1/2
from back of nut to lenght point right hand side 6" 1/16
from back of nut to centre 5" 5/16

these are only rough measurements

I hope they help
[/u]

FernandoDuarte · « **Reply #24 on:** February 25, 2008, 10:21:51 PM »

Thank you so much Becos! :D

Philly Q · « **Reply #25 on:** February 25, 2008, 10:45:26 PM »

Quote from: FernandoEsteves

Could some PRS-owner tell me the measures of the headstock of PRS??? I'm going to build the neck of this Warmoth body, with a PRS headstock

I like that body shape, reminds me of a Gibson L5-S:

FernandoDuarte · « **Reply #26 on:** February 25, 2008, 10:49:07 PM »

Phill, the name at Warmoth of it is exactly L5S :D
I like it, but I thought it would be bigger... it's not much more wider than a LP and looks "shorter" than...
These guitar will have Mules A4, rosewood neck and fingerboard with birds inlay (not bolt on, I'll do it glued, deep set neck)... MUCH work is coming!

Philly Q · « **Reply #27 on:** February 25, 2008, 10:53:44 PM »

Quote from: FernandoEsteves

Phill, the name at Warmoth of it is exactly L5S :D

Ah, I should have looked on the Warmoth site, shouldn't I? :lol:

Sounds great Fernando, show us pics when you've built it!

opprobrium_9 · « **Reply #28 on:** February 26, 2008, 06:04:44 AM »

Quote from: Twinfan

No trem version - the body is too thin.

I'll have to get some good pics of mine done if I can

Jesus Christ Twinfan, this one must have just gone under my radar :lol: You got ANOTHER GUITAR? :lol: :lol: :lol:

Twinfan · « **Reply #29 on:** February 26, 2008, 08:50:11 AM »

Yup - hence the gear clearout!