• Welcome to Bare Knuckle Pickups Forum.
 

T-cut on guitar

Started by hhcave, June 09, 2008, 09:42:34 PM

Previous topic - Next topic

hhcave

So i applied the t-cut to my guitar and rubbed and cleaned off then polished etc.... but there seems to bee a sort of dull type finish with swirl marks where i used the cloth - could anyone tell me what went wrong? Do i need to redo the process? Thanks
Gisbon Les Paul Custom with MMs
Bodenhamer modded Maxon OD808
Mesa/Boogie F-50
Marshall TSL 2x12

Philly Q

Sounds like what I'd be expecting before you polish off the last bit of residue.  There's no way it should be any less shiny than it was before you started.

It should polish up nicely with just a clean soft cloth.  You could try a bit of furniture polish to get rid of the last of the residue, but I've read that it's best to use a wax-free, silicone-free type.  I'm not sure exactly why, but apparently both wax and silicone can build up over time.  Silicone, in particular, is very difficult to remove and can cause problems if the guitar ever needs a refinish.

There are some wax-free, silicone-free furniture polishes, e.g.

http://www.spacesavers.com/furnpolish.html

Or you could get some proper guitar polish like this stuff:

http://www.stewmac.com/shop/Accessories/Cleaners,_polishes,_lubricants/Preservation_Polish.html
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

hhcave

Okay thanks, i'll try polish it up again with the Dunlop 65 i have
Gisbon Les Paul Custom with MMs
Bodenhamer modded Maxon OD808
Mesa/Boogie F-50
Marshall TSL 2x12