• Welcome to Bare Knuckle Pickups Forum.
 

Is this the sound of power tubes dying/going bad?

Started by _tom_, May 26, 2008, 04:33:12 PM

Previous topic - Next topic

_tom_

hmm I just put the old TADs back in and theres still a slight burning smell with them. Maybe its always been there but I've never noticed it before.
[url=http://soundcloud.com/shotgunroyale[Shotgun Royale[/url]

gwEm

tom, you probably already know this - but check the plates to make sure they aren't glowing cherry red. thats a sure sign they need biasing. the paint on new valves sometimes makes a buring smell.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

_tom_

Didnt know that but the plates appear to be normal. The valves seem to be glowing a normal orangey colour.
[url=http://soundcloud.com/shotgunroyale[Shotgun Royale[/url]

Elliot

Sounds like normal power tube burn in then - it is normal for the paint/markings on the tube logos to discolour in the heat.
BKPS: Milks, P90s, Apaches, Mississippi Queens, Mules, PG Blues, BG FP 50s, e.60s strat custom set

_tom_

Odd that the old tubes smell a bit as well though isnt it. Like I said maybe I just didnt notice before. Could be that I've been keeping my pedalboard on top which cant help ventilation. Its on the floor now despite me not having much floorspace to begin with :(

Hopefully that guy will pick up his phone tomorrow so I can get him to bias my amp with the svets in. They're really easy to install (less fiddly than preamp ones!) but I dont know if I feel comfortable with setting the bias. Then again it cant be that hard can it, so long as I dont touch any of the amps internals (except the bias pot with a screwdriver) and use a weber bias rite with a good multimeter?
[url=http://soundcloud.com/shotgunroyale[Shotgun Royale[/url]