• Welcome to Bare Knuckle Pickups Forum.
 

I need help with strat wiring!

Started by Erlend_G, September 22, 2005, 03:36:57 AM

Previous topic - Next topic

Erlend_G

Well, i'm modifying my old beater strat with a new pickguard and a humbucker in the brigde position (S-S-H config), and also new wiring.

I want a single volume control, and a three-way Les paul type switch;
with the 3-way selecting these P.U combinations:

1. Neck single coil only
2. Neck and Middle single coil in Parallel
3. Brigde humbucker only.

Could this be done, considering the physics of the switch, and how?

Thanks alot,
-Erlend

HJM

PhilKing is the switch demon round here - I can't think of a way without having the switch infront of me!
Apache,VHII,Emerald,Nailbomb,MiracleMan,StormyMonday,BlackDog,Trilogy,Mothersmilk,Sultans+Sinner

Tim

Off the top of my head I can't think of a way of doing that with a three way toggle..............there is the LP Custom 3 way though, that may do it(the 3 pickup Custom).
Tim
BKP - "Wound, made and played the traditional way --- by hand!" Amen.

tech33

there is a 3 way switch available that ibanez use, from the outside of the guitar it looks standard, but the actual switch has 12 contacts, allowing you to coil tap etc, this would be what i reccomend, they are available from allparts uk, part no:EP4362-000.

Good Luck
can you do it while i wait?

Tim

That's a Superswitch which is a blade style, I think Erlend is after a toggle style.
Tim
BKP - "Wound, made and played the traditional way --- by hand!" Amen.

HJM

Dimarzio make it - I'll have to look it up again, it's on teh forum somewhere.
Apache,VHII,Emerald,Nailbomb,MiracleMan,StormyMonday,BlackDog,Trilogy,Mothersmilk,Sultans+Sinner

PhilKing

Hi Erland, the gibson LP custom switch could do this.  It is Stewart MacDonalds part 1228

It has 2 regular 3 way switches in it, and the center position gives you one pickup with either of the other 2 (Gibson use bridge and middle).  I gave the wiring for the LP in this link:

http://bareknucklepickups.co.uk/forum/viewtopic.php?t=488

StewMac give you the wiring instructions for a LP/SG here:

http://www.stewmac.com/shop/Electronics,_pickups/Components:_Switches_and_knobs/3/3-way_Pickup_Switches/Instructions/I-1228.html#details

To get what you want though, you would use this:

Lug 1: Hot from bridge pickup volume pot
Lug 2: Hot to output jack, switched output
Lug 3: Hot from neck pickup volume pot
Lug 4: Solder a jumper wire to lug 3
Lug 5: Hot from middle pickup
Lug 6: Not used
So many pickups, so little time

big steve

nice combo, i think it would work well with a mother's milk in the neck, apache in the middle and Mule in the bridge
down from the glens came the marching men...

tech33

Quote from: TimThat's a Superswitch which is a blade style, I think Erlend is after a toggle style.

sorry to disagree tim, but it is a 3 way les paul toggle switch, have used them on many occaisions for just such a reason.
it will def do the trick
can you do it while i wait?

Tim

Wow, new one on me, maybe it's a LP Custom type as that has a lot of tags too.Live'n'learn :D
Tim
BKP - "Wound, made and played the traditional way --- by hand!" Amen.

FELINEGUITARS

Ok
this can be done with a stock USA 3 way switch as found in a tele or old strat
The output tag is the one that is LONG and always in contact with the "switch wiper
See how you get on with this
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

big steve

i hadn't thought of that. good call Jonathan!
down from the glens came the marching men...

PhilKing

I thought he wanted the Les Paul switch?
So many pickups, so little time

FELINEGUITARS

Quote from: PhilKingI thought he wanted the Les Paul switch?

Ok - you are right Phil
Was late at night and I got focussed on how to do it with a tele switch

Didn't realise till this morning that it was an LP switch :oops:
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

PhilKing

That's OK Jonathan, I started to write up the 3-way slider too at first, because that's what I use on most of my guitars.
So many pickups, so little time