• Welcome to Bare Knuckle Pickups Forum.
 

Could a stereo jack be used for a passive guitar circuit?

Started by Yamhammer, November 12, 2008, 12:21:52 AM

Previous topic - Next topic

Yamhammer

I know that stereo output jacks are often used for guitars with EMG pickups, but what about using a stereo jack together with passive pickups and standard 2-conductor wiring?

Does it hurt the sound/signal or not?

Oli

Nope, no difference at all :) Just make sure that you connect the tip and either the ring or sleeve to your hot and ground leads; if you don't get any sound out, then you've connected one to the ring, and one to the sleeve, and if you get sound, but it's noisy, try swapping the two wires round :)
Nailbomb, VHII, Warpig 7, MQ, Black Dog, 10th Anniversary

jpfamps

Yes.

There are plenty of examples of passive stereo guitars/ basses, eg Gibson ES-345 or  Rickenbacker 4001 basses
[url="//www.jpfamps.com"]www.jpfamps.com[/url]

Yamhammer

#3
Thanks much for your help.


gwEm

that stereo socket grips the plug better, and many say thats a good thing.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly