• Welcome to Bare Knuckle Pickups Forum.
 

Tuning Instability

Started by plastercaster, September 05, 2006, 04:54:44 PM

Previous topic - Next topic

plastercaster

my poor old strat has been sitting neglected for a time now, partly because the frets are worn, but largely because every time I use the whammy bar it goes noticably out of tune, even if the strings have been 'bedded in'. How should I sort this? I wanted to give it locking tuners, a graphite nut and a Gotoh-Wilkinson tremolo, but I cant find a 6-hole version of it, which i would need because I dont want to cut chunks of wood out of my guitar. Ive seen it on the gotoh site, but I cant find a gotoh dealer or a shop that sells them. do any of you guys know where I could get one, what would be a good alternative trem?
Thanks,
Bob
Feline Custom, Fender MIJ mustang bass
Orange rocker 30
VHII and Mississippi queen

Antag

IMO the vast majority of tuning problems come from the nut.

You can start by lubricating the slots with a soft lead pencil (about 70p from an arts/crafts shop), or use a specialist product such as Big Bends Nut Sauce (I've heard of people using things like Triflow liquid teflon, WD40 etc but it could get a bit messy and/or damage the finish)

If no joy, get a repairman to recut the slots and/or replace the nut - still a fairly cheap/easy thing to do.  For a strat you also have the option of the LSR roller nut (about £40 +fitting) but be aware that you won't be able to go back as the slot needs to be widened slightly to accomodate it.

Only then would I consider swapping out the trem and/or machineheads - of all the guitars I've owned I've only ever had one where the machineheads were part of the problem.
BKPs: HD, MM, NB, PK, CS, Ab (b&n); Am (b only); VHII, Tril (n only); IT, Slow, Sult (m&n)

Antag

Quote from: AntagI've only ever had one where the machineheads were part of the problem.

Well, two actually, but "first guitars" (in this case a Marlin Sidewinder) don't count! :lol:
BKPs: HD, MM, NB, PK, CS, Ab (b&n); Am (b only); VHII, Tril (n only); IT, Slow, Sult (m&n)

hunter

don't forget the bridge, the screws could be too tight or not aligned or spring tension too weak ...
Tweaker's Paradise - Player's nightmare.

HTH AMPS

The bridge setup is also important - have the outer two bridge screws a half turn from flush then have the inner bridge screws a full turn slacker.

Getting the bridge floating slightly will help rather than having it solid against the body.

Heavier strings help too - I had decent tuning stability with 11s even with Hendrix style divebombs.

:twisted:
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall