• Welcome to Bare Knuckle Pickups Forum.
 

Wiring trouble, please help

Started by Mr. Air, May 07, 2009, 05:43:36 PM

Previous topic - Next topic

Philly Q

Quote from: FELINEGUITARS on May 08, 2009, 08:35:52 PM
Remember that solder flows towards heat!

But it follows gravity too!  :wink:   I hate it when you have a nice little "film" of solder over the hole in a pot lug, then you melt it again and it starts draining away down the lug - probably, I guess, because there's too much solder.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Mr. Air

Thanks for all the advice. It's just so nice that you're taking time to help!

I'll try de- and resoldering the wires on the pot and hopefuly this will cure my problem. If it doesn't I'll try one of the old pots and see if it makes a difference.
Mississippi Queens, Stormy Monday/Apaches, Emeralds, Nailbomb (bridge)

Keven

+1 on filing the back of a pot. most good pots don't need that, but cheaper electronics oriented pots (.50c a piece..) require you to expose the metal. if the back is of a greenish bronze color, it's got a little covering that needs to be scratched off..
My BK's:
Black Dog8-Riff Raff8 / Black Dog7-Mule7
C-Bomb Set / Blackhawk Bridge
Holydiver Set/ BG50 Set

gingataff

Also worth noting is that most pots don't go completely to zero, in fact CTS make a "custom" pot which does go to zero but it costs a bit more than their usual range.
I see a rainbow rising
Look there on the horizon
And I'm coming home