• Welcome to Bare Knuckle Pickups Forum.
 

Please help with a grounding problem

Started by Doctor X, June 27, 2009, 12:54:43 PM

Previous topic - Next topic

Doctor X

Hi all

I've got a problem with my Les Paul that I'm pretty sure is a grounding issue.  It's a Gibson R8 so has 50's wiring.  The guitar gives off a loud hum which stops if I touch any of the metal on the guitar - strings, bridge etc.

I've tried resoldering the braided wire to the back of the volume pots a couple of times but no joy.  Does anyone have any tips for other things I can check?
Gibson '58 VOS - PG Blues, Gibson SG Special - MQ's

Doctor X

Ignore this - if I turn my computer off at the mains then the problem goes away!
Gibson '58 VOS - PG Blues, Gibson SG Special - MQ's

Philly Q

I was going to say if the buzz goes away when you touch the metal parts, that sounds pretty normal.

Hadn't thought you might be sitting in front of a monitor!  :lol:
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

nilsampmaker

If you have shielded pickups I would measure the impedance (ohm) between ground and shield with an multimeter just to make sure they are properly grounded. There should also be a thin blank wire connected to the bridge posts and it could have gotten loose. Just my two cents, Cheers