• Welcome to Bare Knuckle Pickups Forum.
 
Main Menu

New pot fail

Started by syr2012, July 31, 2009, 03:24:02 AM

Previous topic - Next topic

syr2012

I recently bought a new volume pot (CTS) and a proper switch for coil splitting. However, once I installed the goods, the switch doesn't switch, and the volume doesn't go down to zero. Ever. Any ideas?
BKP Team: Bridge MQ, Black. Bridge HD, Raw Nickel.
To Do: Bridge Nailbomb in chrome (?)

Copperhead

Disconnect everything and put your meter on the switch, and the pot to test. Very unusual that both components would be bad. May I suggest the possibility of a wiring problem?
BKPs: Nail Bombsss, Mississippi Queen, BKP-91, Cold Sweat, mystery humbucker, Supermassive

yellowv

Yeah no way the switch and pot are bad. You wired something wrong.
Painkiller , Holy Diver, Cold Sweat and Miracle Man Set

WezV

+1

if it was just one component then fair enough... but you would have to be really unlucky to get two at once
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

syr2012

Yeah, turns out I soldered the ground for the pot incorrectly and then it came undone. I also soldered the ground to the wrong place on the switch. Extra smooth on my part. What's even better is that I bought a linear pot instead of an audio pot, so I get to do the whole thing all over again.
BKP Team: Bridge MQ, Black. Bridge HD, Raw Nickel.
To Do: Bridge Nailbomb in chrome (?)